NOZZLE CLEANING MACHINE
Fully automatic nozzle cleaning machine-XMN-30
During the SMT process, the nozzle is prone to sticking to solder paste or dirt, etc.
This SMT Nozzle Cleaner supports nozzle sizes from 01005 up to 2125 and can handle up to 30 nozzle pieces per cycle
Rated power is max 200W, with a size of approximately 580 × 460 × 480 mm and a weight of ~50 kg, making the device compact enough for SMT…
Replies within 12 hours · layout assessment & sample testing
PRODUCT OVERVIEW
Fully automatic nozzle cleaning machine-XMN-30
During the SMT process, the nozzle is prone to sticking to solder paste or dirt, etc. If it is not maintained for a long time or the cleaning is not thorough during maintenance, the solder paste and dirt will harden, resulting in failure to use normally. It increases the difficulty of cleaning and even causes blockage and waste after a long time. These problems can be easily solved by using a nozzle cleaning machine.
APPLICATIONS & TARGET CUSTOMERS
Who Is It Built For?
Typical stencil & surface cleaning lines this Fully automatic nozzle cleaning machine-XMN-30 is specified into — matched by board size, takt time and process control needs.
1
Automotive Electronics
consistent paste volume through clean stencils
2
Consumer Electronics
fast cleaning cycles between product runs
3
Industrial Control
removal of stubborn flux residue on thick boards
4
Medical Electronics
cleanliness control for regulated assemblies
DELIVERY CASE / AUTOMOTIVE ELECTRONICS
Dual-Table Depaneling with Full Tracing
Barcode, vision alignment, dust collection and MES data interfaces were integrated, cutting manual handling and improving production record integrity.
Will cleaning affect stencil apertures or fine-pitch parts?
Cleaning parameters are set by aperture size and contamination level, with nozzle pressure, detergent temperature and cycle time adjusted to remove residue without damaging fine apertures. Validation is done on your own stencils or assemblies during acceptance testing.
What are the key capabilities of the Fully automatic nozzle cleaning machine-XMN-30?
This SMT Nozzle Cleaner supports nozzle sizes from 01005 up to 2125 and can handle up to 30 nozzle pieces per cycle; Rated power is max 200W, with a size of approximately 580 × 460 × 480 mm and a weight of ~50 kg, making the device compact enough for SMT line integration.
Can samples be tested on our own PCBs before shipment?
Yes. Functional tests, precision checks, continuous running and safety checks are carried out against your own samples before shipment, with acceptance video and reports delivered to you. Share your board data and process requirements and we will confirm the test plan.
What information is needed to quote this machine?
Send PCB dimensions and thickness, BOM, target capacity, product type and inspection requirements. Our engineers reply with a configuration sheet, itemized quotation and a confirmed lead time window within one to two business days.
Not Sure Which Equipment Fits?
Share your PCB, capacity and process goals — our engineers will recommend the right configuration.
Talk to an Engineer