.png?imageMogr2/format/webp)
ICT&FCT AUTOMATIC TESTER
IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000/PMP2000L
The PMP-2000 IN-CIRCUIT AND FUNCTIONAL TESTER for PCBA that combines in-circuit testing with functional testing to verify component integrity, interconnects, and overall board performance before shipment.
ICT + FCT in one system: open/short, component value and polarity checks, plus powered functional tests
Typical Specifications
Air: 0.4–0.6 MPa
Replies within 12 hours · layout assessment & sample testing
PRODUCT OVERVIEW
IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000/PMP2000L
The PMP-2000 IN-CIRCUIT AND FUNCTIONAL TESTER for PCBA that combines in-circuit testing with functional testing to verify component integrity, interconnects, and overall board performance before shipment. Designed as an automatic PCB tester for modern SMT lines, it features a two-stage pressure table that rises fully during debugging and to a mid-position in automatic mode, trimming 1–2 seconds from each cycle to increase throughput.
A high-density interface mating mechanism supports up to 2,048 test pins, improving connection stability and eliminating repeated flat-cable plug/unplug operations. The transport uses a double-screw rail with linear bearings for smooth, level movement, while anti-crush protection safeguards both the board and the fixture. Alarms on board-in/board-out events, interlocks, and fault prompts help maintain safe, reliable operation on the line.
APPLICATIONS & TARGET CUSTOMERS
Who Is It Built For?
Typical electrical test lines this IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000/PMP2000L is specified into — matched by board size, takt time and process control needs.
1
Automotive Electronics
in-circuit and functional coverage for safety boards
2
Consumer Electronics
high-throughput test for volume production
3
Industrial Control
stable contact on high pin-count assemblies
4
Medical Electronics
documented test data for product release
DELIVERY CASE / AUTOMOTIVE ELECTRONICS
Dual-Table Depaneling with Full Tracing
Barcode, vision alignment, dust collection and MES data interfaces were integrated, cutting manual handling and improving production record integrity.
How are fixtures and test coverage defined?
Test coverage follows your netlist, test point list and functional requirements. Fixture design, pin count and probe access are confirmed against your board data, and programs are validated on your samples before shipment.
What are the key capabilities of the IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000/PMP2000L?
ICT + FCT in one system: open/short, component value and polarity checks, plus powered functional tests; Typical Specifications; Air: 0.4–0.6 MPa.
Can samples be tested on our own PCBs before shipment?
Yes. Functional tests, precision checks, continuous running and safety checks are carried out against your own samples before shipment, with acceptance video and reports delivered to you. Share your board data and process requirements and we will confirm the test plan.
What information is needed to quote this machine?
Send PCB dimensions and thickness, BOM, target capacity, product type and inspection requirements. Our engineers reply with a configuration sheet, itemized quotation and a confirmed lead time window within one to two business days.
Not Sure Which Equipment Fits?
Share your PCB, capacity and process goals — our engineers will recommend the right configuration.
Talk to an Engineer