PCB Surface Cleaning Machine
PCB Surface Cleaning Machine SMM-450
The SMM-450 PCB Surface Cleaning Machine is a high-precision cleaning system designed to remove particles, flux residue, or dust from PCB surfaces before soldering or assembly.
Improve quality
Abnormal quality due to dust
The product is unqualified due to residual static electricity
Improve efficiency
Replies within 12 hours · layout assessment & sample testing
PRODUCT OVERVIEW
PCB Surface Cleaning Machine SMM-450
The SMM-450 PCB Surface Cleaning Machine is a high-precision cleaning system designed to remove particles, flux residue, or dust from PCB surfaces before soldering or assembly. As a PCB cleaner, the SMM-450 uses a three-stage spray/jet cleaning process with filtered circulation to prevent recontamination and maintain consistency.
The machine features a fine mesh filtration system to isolate contaminants, and a spray circuit with adjustable water pressure and speed to adapt to different board materials and contamination levels. The clean area supports PCB dimensions from 50 × 50 mm to 450 × 450 mm, accommodating a wide range of product sizes. Adjustable transport speed ensures effective cleaning without damaging sensitive components.
APPLICATIONS & TARGET CUSTOMERS
Who Is It Built For?
Typical stencil & surface cleaning lines this PCB Surface Cleaning Machine SMM-450 is specified into — matched by board size, takt time and process control needs.
1
Automotive Electronics
consistent paste volume through clean stencils
2
Consumer Electronics
fast cleaning cycles between product runs
3
Industrial Control
removal of stubborn flux residue on thick boards
4
Medical Electronics
cleanliness control for regulated assemblies
DELIVERY CASE / AUTOMOTIVE ELECTRONICS
Dual-Table Depaneling with Full Tracing
Barcode, vision alignment, dust collection and MES data interfaces were integrated, cutting manual handling and improving production record integrity.
Will cleaning affect stencil apertures or fine-pitch parts?
Cleaning parameters are set by aperture size and contamination level, with nozzle pressure, detergent temperature and cycle time adjusted to remove residue without damaging fine apertures. Validation is done on your own stencils or assemblies during acceptance testing.
What are the key capabilities of the PCB Surface Cleaning Machine SMM-450?
Improve quality; Abnormal quality due to dust; The product is unqualified due to residual static electricity.
Can samples be tested on our own PCBs before shipment?
Yes. Functional tests, precision checks, continuous running and safety checks are carried out against your own samples before shipment, with acceptance video and reports delivered to you. Share your board data and process requirements and we will confirm the test plan.
What information is needed to quote this machine?
Send PCB dimensions and thickness, BOM, target capacity, product type and inspection requirements. Our engineers reply with a configuration sheet, itemized quotation and a confirmed lead time window within one to two business days.
Not Sure Which Equipment Fits?
Share your PCB, capacity and process goals — our engineers will recommend the right configuration.
Talk to an Engineer